OTR Vergaserkitt MZ660

[mike Redhead]

Good Evening,

OTR Vergaserkitt MZ660 Has anybody fitted one of these kits to a Baggy, I have a "google" translation of the original OTR German instructions but I am struggling with the orientation of the stumbling pipe as the translation is not very clear, any help would be greatly appreciated.

regards,

Mike

[dandywarhol]

This should help you Mike
viewtopic.php?f=3&t=8159

[mike Redhead]

Excellent, thank you Dandywarhol, for pointing me in the right direction

Regards,

Mike

[edfmaniac]

Don't use the bits they provide to drill out your stock jets. They are WAY TOO BIG!!! Even the stock jets are too big.

[dandywarhol]

With ed on this one - especially with a stock airbox.

I'm currently experimenting with Raptor quad carbs coupled to a Micron pipe - going to the dyno shop next week to get the jetting sorted.