MZ/MuZ Riders

by **Zedthou** » Sun Sep 28, 2014 4:42 am

I need replacement clutch & front brake levers for my Baghira so can anyone tell me what other levers are a direct fit?,i'm assuming the Grimeca front master cyclinder will be generic with another bike & possibly the clutch lever & clamp will be off the same bike?.

by **DAVID THOMPSON** » Sun Sep 28, 2014 7:57 am

let us all know when you do find a donor bike ..
at least in the usa nothing else fits

i have been looking since 2002 an only mz fits an mz

dave

by **Baggy_Al** » Sun Sep 28, 2014 5:49 pm

Ebay, Grahams have both in stock, not cheap but if you need them.

Al.

by **duncmac** » Tue Sep 30, 2014 9:23 am

I tried this, got as far as looking at grimeca domino levers (which is what I thought they were) and ordered this http://www.splatshop.co.uk/domino-f-bra ... imeca.html

Doesnt fit!

Think the same front brake set up was used on the aprilia pegasso, but do some checking of part numbers in fische.

by **STANIMAL** » Sun Dec 14, 2014 3:56 pm

I have the same dilemma , but just want to buy a clutch lever and perch in silver . I installed a Brembo BMC and would like the color to match . Any idea who makes a complete assembly ?

by **DAVID THOMPSON** » Sun Dec 14, 2014 8:02 pm

my traveller clutch lever has one from a cannon dale 440
just a weird part from the junk bin
as i wanted an adjuster at the top

also using some bmw fittings at the bottom so i could use a saxon tour clutch cable
i had in stock for the 500e
dave

by **STANIMAL** » Sun Dec 28, 2014 4:08 pm

Problem solved , found another Brembo in black .

by **DAVID THOMPSON** » Mon Dec 29, 2014 12:09 am

i always carry spare levers every time one of mine falls over i break a lever

the joys of a bmw /2 or /5 never broke any levers but i have turned a valve cover over
and patched the hole or cracks with JB weld

dave

by **handsomejackuk** » Sun Jan 04, 2015 10:45 am

clutch levers pretty easy to get i got a spare black one in the shed

by **Zedthou** » Wed Sep 28, 2016 4:16 pm

No update on this folks?,everybody still in the dark about generic levers????

by **DAVID THOMPSON** » Thu Sep 29, 2016 7:34 am

at least in the usa there not found
i hand sorted a dealers new old stock one time over 3000 levers
and nothing fit

raid a kaw klr650 for its levers on both sides perch and all

Dave

by **Zedthou** » Thu Jan 05, 2017 5:59 pm

Cheers,i've just aquired a complete baggy rolling chassis,everthing bar the motor,carb & zorst,plenty spares to play with now!

by **lcrken** » Mon Oct 30, 2017 12:51 pm

Any updates on this? I need both clutch and brake levers for my Baghira. I've emailed Graham asking if they have them, but no reply so far.

Ken

by **lcrken** » Mon Oct 30, 2017 1:11 pm

Answering my own question. I just found both levers on eBay from a German supplier, Zweirad Lenk, and ordered them. Just over $20 each, including shipping.

Ken

by **den** » Fri Nov 03, 2017 1:26 pm

lcrken wrote:Answering my own question. I just found both levers on eBay from a German supplier, Zweirad Lenk, and ordered them. Just over $20 each, including shipping.

Ken

Fantastic, post the link so we can see and let us know how they fit, The reason the thread is slightly closed because i dint think anyone has yet found a decent pair to fit

MZ/MuZ Riders

Baghira Levers

Baghira Levers

Re: Baghira Levers

Re: Baghira Levers

Re: Baghira Levers

Re: Baghira Levers

Re: Baghira Levers

Re: Baghira Levers

Re: Baghira Levers

Re: Baghira Levers

Re: Baghira Levers

Re: Baghira Levers

Re: Baghira Levers

Re: Baghira Levers

Re: Baghira Levers

Re: Baghira Levers

Who is online