I want to remove the left hand crankcase cover as it appears when the oil levels are correct I have a leak on the joint chucking oil over the back end. Removed all screws, kickstart & gear lever, clutch cable but the case will only come out about 6mm then sticks. I am reluctant to use force; am I missing the obvious?
Regards
Mark
MZ/MuZ Riders
A community for owners and riders or MZ Motorcycles, Scooters, and ATVs.
Left hand crankcase cover removal.
Moderators: DAVID THOMPSON, phlat65
4 posts
• Page 1 of 1
Left hand crankcase cover removal.
by millhouse mark » Wed Jul 09, 2014 7:38 am
- millhouse mark
- Posts: 3
- Joined: Tue Apr 15, 2014 2:20 pm
Re: Left hand crankcase cover removal.
by DAVID THOMPSON » Wed Jul 09, 2014 9:11 am
which model bike
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
-
DAVID THOMPSON - Moderator
- Posts: 5162
- Joined: Sun Nov 23, 2003 11:01 am
- Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV
Re: Left hand crankcase cover removal.
by arry_b » Wed Jul 09, 2014 4:28 pm
I'm guessing it's a 250/300 of some type going by your description of where the parts are located.
If so, put the kickstart back on now before you take the cover off.
You need to remove the bolt from the end of the crankshaft, under the circular clutch cover which is held on with three screws.
You'll need something to lock the engine (a rope down the plug hole) and a 22mm deep socket to get the nut off. The cover then pulls off easily.
If so, put the kickstart back on now before you take the cover off.
You need to remove the bolt from the end of the crankshaft, under the circular clutch cover which is held on with three screws.
You'll need something to lock the engine (a rope down the plug hole) and a 22mm deep socket to get the nut off. The cover then pulls off easily.
- arry_b
- Posts: 203
- Joined: Sun Nov 04, 2012 3:31 pm
Re: Left hand crankcase cover removal.
by millhouse mark » Thu Jul 10, 2014 1:17 pm
Sorted chaps; thanks for your help anyway; just waiting for new gasket set now.
- millhouse mark
- Posts: 3
- Joined: Tue Apr 15, 2014 2:20 pm
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: Bing [Bot] and 78 guests