torque settings

[shaunlacy]

this topic got posted 2 different places on the site
see other post here
viewtopic.php?f=5&t=7291
dave site mod



Good afternoon all,
After taking my ETZ 250 (with a 301 barrel) out for a lengthy run I noticed a trickle of oil from the base of the barrel. on discussing it with my bro (who'm I got it from & who fitted the barrel) I discovered it wasn't torqued (which was good of him).

Can anyone tell me, as I don't have a manual yet, what the torque settings are.

Your help would be very much appreciated

Shaun
BMW R1150RT/MZ 250 squire combo/XJ900 project

[triclops]

Hi Shaun in the haynes manual it says 19 ft lb hope this helps and the MZ workshop Manual says 26 Nm or 2.6kpm
Jeff Walch

[DAVID THOMPSON]

this topic got posted 2 different places on the site
see other post here
viewtopic.php?f=5&t=7291
check the mz manual for the spec
i have found to many mistakes in Haynes over the years to trust them
dave

[MichaelTorre]

I hope the 75 ft lbs I put the clutch on the crank is ok.
My conversion from NM.
God save the King.
M

[shaunlacy]

cheers fellas!