MZ/MuZ Riders
A community for owners and riders or MZ Motorcycles, Scooters, and ATVs.
polishing etz forks
Moderators: DAVID THOMPSON, phlat65
7 posts
• Page 1 of 1
polishing etz forks
by craiggor » Sun Apr 21, 2013 7:25 am
I'am going to polish the forks on my etz. has anyone removed the casting lines(for want of a better word)that run down the front and back. or do you think they are there for strength.jap bikes don't have them. BMW's do but are a bigger bike.
- craiggor
- Posts: 22
- Joined: Sun Apr 21, 2013 7:15 am
- Location: bury
Re: polishing etz forks
by DAVID THOMPSON » Sat Oct 26, 2013 3:42 pm
inspect often and do not do the engine cases as the sand casting finish helps with cooling
D
D
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
-
DAVID THOMPSON - Moderator
- Posts: 5162
- Joined: Sun Nov 23, 2003 11:01 am
- Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV
Re: polishing etz forks
by craiggor » Sat Oct 26, 2013 4:20 pm
inspect often I like that.does that meen the whole of the bike.
- craiggor
- Posts: 22
- Joined: Sun Apr 21, 2013 7:15 am
- Location: bury
Re: polishing etz forks
by therealche » Sat Oct 26, 2013 4:56 pm
craiggor wrote:inspect often I like that.does that meen the whole of the bike.
No, wash it once a year before the MOT!
ES250 Doppelport, ES250, ES250/1, ES250/2,ETS 250, ES150, ETS150, BK350, IWL Pitty, SR56 Wiesel, SR59 Berlin, Troll............ and thats just the German two strokes!
http://thecomeconcollection.blogspot.com/
http://thecomeconcollection.blogspot.com/
- therealche
- Posts: 685
- Joined: Mon Mar 19, 2012 6:44 pm
- Location: Bradford, West Yorkshire
Re: polishing etz forks
by DAVID THOMPSON » Sat Oct 26, 2013 8:54 pm
one wash a year is so you don't wash the grease out of any bearings and ruin them
D
D
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
-
DAVID THOMPSON - Moderator
- Posts: 5162
- Joined: Sun Nov 23, 2003 11:01 am
- Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV
Re: polishing etz forks
by MichaelTorre » Tue Oct 29, 2013 12:03 pm
+ 1 on the wash bit.
I cringe when I see people constantly soaking their machines with a caustic solution.
(Soaps)
M
I cringe when I see people constantly soaking their machines with a caustic solution.
(Soaps)
M
- MichaelTorre
- Posts: 135
- Joined: Sun Aug 12, 2012 8:57 am
7 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 61 guests