Hi Guys,
Has anyone any suggestions where I could buy drivers light, indicator and rear light bulbs? I have a MZ 125 TS the voltage is 6V and I cant seem to find any that fit in the shops or on ebay..
Any help would be appreciated.
Cheers
Joe
MZ/MuZ Riders
A community for owners and riders or MZ Motorcycles, Scooters, and ATVs.
Purchasing 6V Bulbs
Moderators: DAVID THOMPSON, phlat65
4 posts
• Page 1 of 1
Purchasing 6V Bulbs
by josephfox » Wed Jun 12, 2013 7:16 am
- josephfox
- Posts: 2
- Joined: Fri May 24, 2013 4:56 pm
Re: Purchasing 6V Bulbs
by DAVID THOMPSON » Wed Jun 12, 2013 12:20 pm
try this page
http://www.norbsa02.freeuk.com/
paul goff he seems to be the go to guy for odd lighting
and the site is a treasure of things for bikes
http://www.norbsa02.freeuk.com/
paul goff he seems to be the go to guy for odd lighting
and the site is a treasure of things for bikes
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
-
DAVID THOMPSON - Moderator
- Posts: 5162
- Joined: Sun Nov 23, 2003 11:01 am
- Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV
Re: Purchasing 6V Bulbs
by ericetz301 » Wed Sep 04, 2013 8:51 am
I have found there are available from Mr. e bay, search `motorcycle acessories` for `6v bulbs`, or search on the general list for `6v scooter bulb`,
this turns up most types.
another option, if your handy with a solder iron, are the various U tube clips for DIY LED replacements, not forgetting an electronic indicator/turn signal relay so that you can use LED indicator bulbs or bulbs of a lowere wattage bulb ie ( 10 W. instead of 21W) to save the odd amp or two.
something else, Ive found work quite well are some of the 12v LED bulbs work quite well at 6V, and are cheap enough to try out, Mr e bay again.
hope that is of interest. cheers Eric.
this turns up most types.
another option, if your handy with a solder iron, are the various U tube clips for DIY LED replacements, not forgetting an electronic indicator/turn signal relay so that you can use LED indicator bulbs or bulbs of a lowere wattage bulb ie ( 10 W. instead of 21W) to save the odd amp or two.
something else, Ive found work quite well are some of the 12v LED bulbs work quite well at 6V, and are cheap enough to try out, Mr e bay again.
hope that is of interest. cheers Eric.
- ericetz301
- Posts: 43
- Joined: Tue Jun 19, 2012 4:43 am
Re: Purchasing 6V Bulbs
by therealche » Wed Sep 04, 2013 9:48 am
ES250 Doppelport, ES250, ES250/1, ES250/2,ETS 250, ES150, ETS150, BK350, IWL Pitty, SR56 Wiesel, SR59 Berlin, Troll............ and thats just the German two strokes!
http://thecomeconcollection.blogspot.com/
http://thecomeconcollection.blogspot.com/
- therealche
- Posts: 685
- Joined: Mon Mar 19, 2012 6:44 pm
- Location: Bradford, West Yorkshire
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 8 guests