MZ/MuZ Riders

Good Evening,

OTR Vergaserkitt MZ660 Has anybody fitted one of these kits to a Baggy, I have a "google" translation of the original OTR German instructions but I am struggling with the orientation of the stumbling pipe as the translation is not very clear, any help would be greatly appreciated.

regards,

Mike

This should help you Mike
viewtopic.php?f=3&t=8159

Excellent, thank you Dandywarhol, for pointing me in the right direction

Regards,

Mike

Don't use the bits they provide to drill out your stock jets. They are WAY TOO BIG!!! Even the stock jets are too big.

With ed on this one - especially with a stock airbox.

I'm currently experimenting with Raptor quad carbs coupled to a Micron pipe - going to the dyno shop next week to get the jetting sorted.