MZ/MuZ Riders

Has anyone replaced the electrical part of the switch?

Reason:
Lost power Wednesday. It started with the intermittent contact with handlebar movement.
Checking the wiring and found a broken solder connection in the ignition switch.
Fixed that and moved the wires around for a bit more slack...all good for now.

Knowing how things go...

Is there anything that can be subbed...

I e-mailed Grahams for a price quote.
Bill R

look at link for a list of bikes that use the same keys may be same lock set

moto guzzi comes to mind as well as some HD
a local breaker may have one

viewtopic.php?f=3&t=2596&p=14824&hilit=keyskeys#p14824

keyskeys in the site search box
if you take it all off be careful to locktite the bolts so it does not fall apart and wreck you
dave

Thanks Dave.
I knew it was in here somewhere.
Will check with the local junkers to see what is out there.

Good reminder on the lock-set bolts. They are tight, I gave 'em a good twist while I was in there.
If I can just get the electric switch, that's just 2 Philips screws.
Bill R

not many scrappers up my way any more

a good place to start may be a guzzi dealers scrap tub/scrap frames

or ask scooter club member for who works on the yamaha zuma scooters

and a lot of harleys use these switches

but bikes with rotax 4 strokes are wired different because of the way the spark is shut off
HD MT 500 is one