took my 301 out for its maiden voyage this afternoon and all seemed fine revved strong through the gears but when I was sat in top gear it popped and farted and the engine died. when I let the throttle of it picked up and seemed fine for a 400 meters then it died again this happened over my 20 mile run.
cleaned the carb and all seems fine the needle is set on the top groove so wondered if anyone can let me know how there carb is set up
its a bing 84
cheers dean
MZ/MuZ Riders
A community for owners and riders or MZ Motorcycles, Scooters, and ATVs.
running problem
Moderators: DAVID THOMPSON, phlat65
4 posts
• Page 1 of 1
running problem
by big mac » Sun Sep 29, 2013 1:25 pm
- big mac
- Posts: 18
- Joined: Thu Aug 29, 2013 11:55 pm
Re: running problem
by therealche » Mon Sep 30, 2013 6:18 am
Not sure of Bing settings but Ive just looked at one on my bench ( from a 301) and the needle is a 4E1 and the clip is in the 3rd of 4 grooves counted from the top. Just a thought.. have you checked that the hole in the fuel cap isn't blocked?
ES250 Doppelport, ES250, ES250/1, ES250/2,ETS 250, ES150, ETS150, BK350, IWL Pitty, SR56 Wiesel, SR59 Berlin, Troll............ and thats just the German two strokes!
http://thecomeconcollection.blogspot.com/
http://thecomeconcollection.blogspot.com/
- therealche
- Posts: 685
- Joined: Mon Mar 19, 2012 6:44 pm
- Location: Bradford, West Yorkshire
Re: running problem
by big mac » Mon Sep 30, 2013 2:03 pm
hadn't thought of the fuel cap also
going to decoke the exhaust
cheers dean
going to decoke the exhaust
cheers dean
- big mac
- Posts: 18
- Joined: Thu Aug 29, 2013 11:55 pm
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 256 guests