Does a 1979 TS 150 require a head gasket?
Many thanks
Dave
MZ/MuZ Riders
A community for owners and riders or MZ Motorcycles, Scooters, and ATVs.
Head Gasket
Moderators: DAVID THOMPSON, phlat65
3 posts
• Page 1 of 1
Head Gasket
by suzukix7 » Tue Jul 08, 2014 1:19 pm
Hi guys,
Does a 1979 TS 150 require a head gasket?
Many thanks
Dave
Does a 1979 TS 150 require a head gasket?
Many thanks
Dave
- suzukix7
- Posts: 52
- Joined: Wed Jun 18, 2014 6:42 am
Re: Head Gasket
by Agronski » Tue Jul 08, 2014 2:18 pm
Nope, no head gasket.
...but if you think the head is leaking, you can always smooth the mating surface down a bit with some grinding paste or 800-1600 grit sandpaper on a bit of perfectly smooth glass. Plenty of hints about good grinding technique online.
Also, make sure the head bolts are torqued to the right spec - M10 nuts, so about 10Nm (9ft-lb). Be sure to tighten them in a diagonal pattern to avoid distorting the head.
___
...but if you think the head is leaking, you can always smooth the mating surface down a bit with some grinding paste or 800-1600 grit sandpaper on a bit of perfectly smooth glass. Plenty of hints about good grinding technique online.
Also, make sure the head bolts are torqued to the right spec - M10 nuts, so about 10Nm (9ft-lb). Be sure to tighten them in a diagonal pattern to avoid distorting the head.
___
- Agronski
- Posts: 53
- Joined: Sun Apr 14, 2013 7:28 am
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 249 guests