Does anyone have an idea of which bikes have compatible CDIs and what would happen if I got one that fitted but wasn't compatible in 'electrickery' ways?
Thanks
MZ/MuZ Riders
A community for owners and riders or MZ Motorcycles, Scooters, and ATVs.
CDI units
Moderators: DAVID THOMPSON, phlat65
9 posts
• Page 1 of 1
CDI units
by bikerbabe » Thu Apr 14, 2005 5:15 pm
Ok, brain picking time. On the back of my previous Failure to Start thread, it still doesn't start, and it's looking like it could be the CDI at fault. I'm going to test mine on another bike to be sure, but as I've been looking on Ebay today, I see loads of CDI units for other bikes.
Does anyone have an idea of which bikes have compatible CDIs and what would happen if I got one that fitted but wasn't compatible in 'electrickery' ways?
Thanks
Does anyone have an idea of which bikes have compatible CDIs and what would happen if I got one that fitted but wasn't compatible in 'electrickery' ways?
Thanks
Can't think of one.
- bikerbabe
- Posts: 15
- Joined: Wed Nov 10, 2004 6:48 pm
- Location: Aberdeenshire
by keithcross » Thu Apr 14, 2005 5:34 pm
The CDI units from the following will fit.
Yamaha SZR660
Yamaha XTZ660
Any MZ 660
yamaha TDM 850 (watch the revs though as the rev limiter is set higher)
Keith
Yamaha SZR660
Yamaha XTZ660
Any MZ 660
yamaha TDM 850 (watch the revs though as the rev limiter is set higher)
Keith
Ride it like you stole it
- keithcross
- Posts: 922
- Joined: Thu May 20, 2004 1:35 pm
- Location: Hampshire England
by DAVID THOMPSON » Thu Apr 14, 2005 9:49 pm
if you find one for the 125's email me
as i have found nothing on the 125's except the starter relay
as i have found nothing on the 125's except the starter relay
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
-
DAVID THOMPSON - Moderator
- Posts: 5162
- Joined: Sun Nov 23, 2003 11:01 am
- Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV
by F0ul_Oli » Fri Apr 15, 2005 6:30 am
keithcross wrote:The CDI units from the following will fit.
Yamaha SZR660
Yamaha XTZ660
Any MZ 660
yamaha TDM 850 (watch the revs though as the rev limiter is set higher)
Keith
The TDM surprises me - I always thought you needed the get the CDI unit off another bike with the same number of cylinders.
Another question I have is what year TDM? The ones after the 96 facelift have a different firing order to give a big twin noise!
Oli
I will only run out of ways of modify the Baggy when it weighs less that 100 kg and runs 100 bhp at the back wheel!!
http://www.businessandit.co.uk - putting the IT in Profit!
http://www.businessandit.co.uk - putting the IT in Profit!
- F0ul_Oli
- Posts: 103
- Joined: Tue Mar 01, 2005 9:42 am
- Location: Deeside,North Wales,UK
by MuzzinMo » Fri Apr 15, 2005 10:14 am
Hi there!
You should watch out for a TDM 850 3VD item, not for the 4TX series.
The rev limiter is set at 8400rpm, ignition some degrees earlier (38° to 42°...not tooo sur about the numbers).
Just have a look ebay, good luck.
Regards, Mirko
http://www.mzskorpion.de
You should watch out for a TDM 850 3VD item, not for the 4TX series.
The rev limiter is set at 8400rpm, ignition some degrees earlier (38° to 42°...not tooo sur about the numbers).
Just have a look ebay, good luck.
Regards, Mirko
http://www.mzskorpion.de
- MuzzinMo
- Posts: 23
- Joined: Wed Jul 21, 2004 8:32 am
- Location: Germany
by bikerbabe » Sat Apr 16, 2005 2:55 pm
if you find one for the 125's email me
as i have found nothing on the 125's except the starter relay
Have found a great site with lots of stuff from Yammy 125's but I don't know what engine the SX has - is it a Yam of some kind?
Anyway, the site is http://www.cheshiremotorcyclesalvage.com/acatalog
and they've got everything but one for the Skorp
Can't think of one.
- bikerbabe
- Posts: 15
- Joined: Wed Nov 10, 2004 6:48 pm
- Location: Aberdeenshire
by DAVID THOMPSON » Sat Apr 16, 2005 8:19 pm
the one from the 125 is not a yamaha part
i think its made by a company in Solovinia as oem part
for other bikes check
http://www.mz-b.de
they do replacement systems for old bikes
and old mz and jawa parts
i think its made by a company in Solovinia as oem part
for other bikes check
http://www.mz-b.de
they do replacement systems for old bikes
and old mz and jawa parts
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
-
DAVID THOMPSON - Moderator
- Posts: 5162
- Joined: Sun Nov 23, 2003 11:01 am
- Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV
9 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 262 guests