Best part is I just got the bike YESTERDAY.
I need a caliper. First bike i've had in 9 months and I've broken it!
MZ/MuZ Riders
A community for owners and riders or MZ Motorcycles, Scooters, and ATVs.
Need a front caliper for a 98 660
Moderators: DAVID THOMPSON, 125SMash, phlat65
3 posts
• Page 1 of 1
Need a front caliper for a 98 660
by ailiaw » Mon Aug 22, 2011 7:25 pm
So I was doing a brake job today and i tightened the bleeder nipple on the front caliper a little too much and the caliper hole broke in half. So now I have an unrepairable caliper and am in need of one.
Best part is I just got the bike YESTERDAY.
I need a caliper. First bike i've had in 9 months and I've broken it!
Best part is I just got the bike YESTERDAY.
I need a caliper. First bike i've had in 9 months and I've broken it!
- ailiaw
- Posts: 4
- Joined: Mon Aug 22, 2011 7:20 pm
Re: Need a front caliper for a 98 660
by billr » Tue Aug 23, 2011 9:22 am
Skorpion?
Check around breakers and see if you can find a Brembo with 40mm bolt spacing.
Much better feel than the Grimeca.
Similar to this:
Brembo 4 piston caliper
I got lucky and got a NOS for under $100 USD.
Good luck,
Bill R
Check around breakers and see if you can find a Brembo with 40mm bolt spacing.
Much better feel than the Grimeca.
Similar to this:
Brembo 4 piston caliper
I got lucky and got a NOS for under $100 USD.
Good luck,
Bill R
- billr
- Posts: 319
- Joined: Fri Jul 03, 2009 9:27 pm
- Location: Nashville, TN
Re: Need a front caliper for a 98 660
by RiverDrive » Thu Aug 25, 2011 11:33 am
I agree with Bill R, it's a direct swap and a big improvement. But, if Your an "I want to keep the bike totally stock" kind of guy I have one available.
01 Sport Cup Gone Sport
-
RiverDrive - Posts: 131
- Joined: Thu Aug 19, 2004 12:58 pm
- Location: Philadelphia PA. US
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 3 guests